Yongcheng Xingye manufactures steel storage sheds for farms and sites needing covered space by the square metre. Each shed ships as a numbered bolt-together kit with a galvanised frame and corrugated cladding, erected in days. Spans run from 6 to 15 metres. Send size and site conditions for a quote.
Yongcheng Xingye supplies a steel storage shed as a bolt-together kit for farms, workshops and yards needing cover quickly. A galvanised steel frame carries corrugated wall and roof sheets, so the finished shed protects machinery, tools, feed and stock from rain and sun. Buyers choose a standard size or send dimensions for a custom layout, and one set can ship as a sample. Ground preparation is limited to a level base or concrete blocks.
Each kit ships as numbered components: galvanised frame sections, corrugated roof and wall sheets, a sliding door or roller shutter, bolts, anchor fixings and an assembly drawing. All holes are pre-drilled at the factory, so erection needs hand tools rather than welding equipment. Optional extras include a ridge vent, side louvres, a personnel door and a raised threshold.
| Item | Specification |
|---|---|
| Building Type | Bolt-together shed |
| Standard Size | 6x6 m, 6x9 m, 8x12 m, custom |
| Clear Span | 6-15 m |
| Eave Height | 2.5-4 m |
| Frame | Galvanised steel, Q235 |
| Roof / Wall | Corrugated sheet, 0.3-0.5 mm |
| Connection | Bolts, no site welding |
| Door | Sliding door or roller shutter |
| Foundation | Blocks or level ground |
| Surface | Hot-dip galvanised or painted |
| Assembly | Small crew, a few days |
| MOQ | 1 set |
Galvanising gives the frame a protective zinc layer, so humidity and rain do not attack the steel the way they attack painted carbon steel. Bolt-together assembly avoids site welding, which keeps the coating intact at the joints. Corrugated sheets shed water quickly, and a ridge vent or side louvres reduce condensation. For coastal or high-humidity sites, specify hot-dip galvanising and marine-grade fixings at enquiry.
Set the blocks or level the base, lay out the frame, then bolt the columns and rafters together. Roof sheets follow, then wall sheets and the door. Two to four workers with hand tools handle a standard size, and a larger shed may need a small crane for the frame. Because the kit is pre-drilled and numbered, the sequence follows the drawing without measuring or cutting on site.
Frame sections bundle together, corrugated sheets stack flat and nest tightly, and bolts and small fittings ship in sealed cartons. Each part carries a number matching the assembly drawing, so a small crew can unload and sort without confusion. A steel storage shed loads flat-packed by set or by tonne; the exact figure depends on shed size and packing density, so request a loading plan once the specification is fixed.
Missing or damaged parts are replaced from the spare pack shipped with each order. The export desk answers complaint emails within one working day with photos and a dispatch plan. A claim should include the part number on the packing list and clear photos of the fault, so the correct replacement leaves the first time. Defects confirmed by inspection are covered under the written warranty. Damage from site handling falls outside cover and can be quoted as spares.
Founded in 2009, Beijing Yongcheng Xingye Steel Structure Co., Ltd. runs a head office in Shunyi District, Beijing and a 3,000 square metre fabrication workshop in Hebei. Steel cutting, welding, roll forming and panel production run in-house, so frame quality and delivery dates stay under one chain.
ISO 9001 and CE certification apply where relevant, and the export desk handles OEM and ODM orders for buyers in the Middle East, Africa, Southeast Asia and South America. Design support covers standard sizes and custom layouts, with assembly drawings supplied for every shipment.
Standard sheds run from 6x6 m to 8x12 m, and custom dimensions are built to order. Send the intended use, the largest item to store and the available ground area for a recommendation.
Yes. A single set ships as a sample, which lets a buyer check the coating, fixings and assembly method before placing a bulk order.
The frame is galvanised, and hot-dip galvanising is available for coastal or humid sites. Corrugated sheets are coated steel, and marine-grade fixings can be specified where salt exposure is a concern.
A bolt-together shed can be dismantled and re-erected on a new base, provided parts are kept together during the move, which suits seasonal storage and rented land.
A level, compacted base is enough for most small sheds. Concrete blocks under the column feet give a more permanent fix and help keep the doors aligned.
Ridge vents and side louvres can be included in the design. These reduce heat build-up and condensation, which matters when storing feed, timber or machinery.
Numbered parts and an assembly drawing ship with every set, and video guidance is available. Larger orders can include remote support during erection.
A steel storage shed gives a farm or yard secure covered space with a galvanised frame and a kit going up in days. Send the size, door preference and site conditions for a layout and quote.